Anycubic Photon Mono X brings large built volume and fast printing speed with monochrome LCD display
Anycubic has announced it’s latest Photon line product Anycubic Photon Mono X with large build volume and faster printing speed for 3D printing enthusiasts. The 4K monochrome screen and high performance Z-axis motion system make the printing process productive and prints with high-precision prints.
Monochrome LCD screen for high speed
Featuring monochrome LCD display, the Photon Mono X has incredible printing speeds. It only takes 1.5-2 seconds per layer compared to conventional other LCD 3D printers with 7-8 seconds per layer. The max print speed is 60mm/h, 3X faster than the Photon. The monochrome LCD is also stable and has a much longer life expectancy than conventional LCD displays. Photon Mono X promises the life expectancy up to 2000 hours in the normal use.
Large build volume to meet your big project needs
The build volume make this printer stand out from the rest of the pack. The build area of Photon is 115mm x 65mm x 155mm, while the new one offers a print volume of 192mm*120mm*245mm, as well as comes with a a 8.9” screen, allowing you to create bigger models or print multiple models at once.
Produces prints of high quality with an impressive resolution of 10 to 150 µm
The Photon Mono X offers outstandingly high-precision printing thanks to a neatly attached lead screw and dual linear rails, all designed to ensure that Z-axis moves smoothly and accurately. The 4K LCD screen resolves enough detail to output fine detail and intricate prints consistently. It also comes with matrix parallel UV lighting to uniformly distribute light energy which enhances the precision of the print. Powered by these features, the Photon Mono X provides large prints with high-precision details.
Support WIFI module for remote control
Anycubic Photon Mono X comes with Wifi module, you can enjoy the process by monitoring printings and adjusting the print settings on the Anycubic APP for more convenience.
Large interface for easier adjustment
The Photon Mono X comes equipped with a 3.5 -inch touchscreen interface, which makes it far easier to adjust settings and initiate prints.
Cooling device for stable printing performance and longer service life.
There’s a built-in cooling system that prevents the ultraviolet LED lights from overheating the printer. This increases the life span of the module and can allow longer work hours on a single project.
Simple UI design
It’s UI is simple and straightforward. The menu is laid out logically and is labeled clearly, so you’d be hard-pressed to get lost or confused.
- System : ANYCUBIC Photon Mono X
- Operation : 3.5 inch Touch Screen
- Software : ANYCUBIC Photon workshop
- Connectivity : USB
- Technology: LCD-based SLA
- Light-source: high-quality filament（wavelength 405nm）
- XY Res.: 0.050mm 3840*2400（4K）
- Z Axis Res.: 0.01 ~ 0.15mm
- Layer Res.: 0.01mm
- Printing Speed: MAX 60mm/h
- Rated Power: 120W
- Printer Size: 270mm(L)*290mm(W)*475mm(H)
- Build Volume: 192mm(L）*120mm(W）*245mm（H）
- Package Size: 365*380*580mm
- Material: 405nm UV Resin
The pre-order price of Photon Mono X is only $589, click here to buy.