I have printed this model with white Ultimaker PLA with a 0.15mm resolution. I used 18% infill (standard at this layerheight in Cura). I use a 0.4mm nozzle and heated my extruder to 210 degrees Celcius. My printbed was heated to 60 degrees Celcius. I used my support at 65 degree touching on platform only. The print-time is 4h30min. And it used 31 gram (3.93m) of my spool of filament. My printspeed is 60mm/s.
It is a very cool model, and it is functional to.