Everest (Easy print no support)
?
Make’s quality:
5.0/5
(1 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating:
0/5
- 3 likes
- 1 comment
Maker
3D Model
:format(webp)/https://files.cults3d.com/uploaders/13596354/illustration-file/cb00c76d-e589-45c3-9453-74e7cfe6351e/Everest.gif)
Make’s description
Slicer: Slic3r
Printtime: 7h
3D Printer
Creality Ender 3 ProFilament
Amolen Marble PLA- Raft: No
- Temperature: 205 ℃
- Support: No
- Infill: 10 %
- Speed: 50 mm/s
You have a problem with this Make?
Report a problem.
:format(webp)/https://files.cults3d.com/uploaders/13835897/photo-file/081a4d30-4091-4ec6-9ff7-a3a88c8a8af7/1000003376.jpg)
:format(webp)/https://files.cults3d.com/uploaders/14596569/photo-file/5071b7d0-8d1f-4636-8a79-fcc16fee8138/403865cb9bcecb1ff73344b170288e8b-1.jpg)
:format(webp)/https://files.cults3d.com/uploaders/13442019/photo-file/59ab0c8b-0d97-482d-ba0a-541645f79637/32C7E294-EEBC-40F8-AF77-8FD7901034D8.jpeg)
:format(webp)/https://files.cults3d.com/uploaders/21590263/photo-file/24b6f1d2-f83c-4949-8eb0-e72293da8ef0/EF48DED1-BD64-41E9-9222-802A56BCCB04.jpeg)
Add a comment
One comment