Skip to content

Rem and Ram; Rezero

?
Make's quality: 5.0/5 (1 vote)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
  • 3 likes
Maker
3D Model

Make's Description

I tried making this on my prusa mini+ with 205c and bed of 50c 90% speed, but I failed. Reason was the print moved due to lack of bed heat.
Changed it to 215c and 60c, 100% speed And it worked fine.
but beware during printing you might need to pause and remove some defects ( Did this once only).
I rescaled it to:
Height: 0.330 mm.
Width: 0.540 mm.
speed: 30 mm/s.
Time: 20Hour 24min.
print setting :(0.05mm) Ultra-detail @Mini.
Slicer: PrusaSlicer & G-Code viewer 2.3.2
Totally worth the time ♥.

  • Raft: No
  • Temperature: 215 ℃
  • Support: No
  • Infill: 48 %
  • Speed: 100 mm/s

Other makes from the same 3D model


Add a comment