Piggy Sitting(Sir Pigglesfree): single extrusion version
Make’s quality: 5.0/5 (1 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating: 0/5
- 43 views
- 10 likes
- 0 comments
Sir Pigglesfree printed at 200% sliced with PrusaSlicer
- Raft: No
- Resolution: 0.2 mm
- Temperature: 215 ℃
- Support: No
- Infill: 10 %
- Speed: 50 mm/s
You have a problem with this Make? Report a problem.
Other makes from the same 3D model