Ninth Season Levirobot Easy-print Pack
Make's quality: 5.0/5 (1 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating: 0/5
- 3 likes
The 5 plates took between 1 and 2 hours each to print some of the pieces did not print and will have to reprint. I printed on my Photon that has a mono upgrade kit from ChituSystems. Print settings were 1.4s layer times at .05mm.
- Resolution: 0.05 mm
- Infill: 100 %
- Speed: 90 mm/s