Handle for Elegoo Saturn
Make's quality: 5.0/5 (1 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating: 0/5
- 2 likes
Printed with PLA for 40% infill to make solid.
Attached with M5x30M screws, flat washers on each side and a lock washer.
Drilling holes in Cover, used a reamer not a drill to avoid cracking or damaging the cover.
- Temperature: 220 °C
- Infill: 40 %
- Speed: 30 mm/s