Skip to content
Free 3d model Gumby's Adventures (Part 1), jdcamc2

Did you 3D print this model?

Gumby's Adventures (Part 1)

Maker
3D Model

Make's Description

Printed using TPU filament, settings as follows: 250c nozzle, 80c bed, .2mm layer, 20mm/s speed, no retraction, extrusion multiplier at 100%, 3 layer perimeter, 6 layer bottom, 8 layer top.

  • Raft: No
  • Resolution: 0.2 mm
  • Temperature: 250 °C
  • Support: No
  • Infill: 10 %
  • Speed: 20 mm/s

Add a comment