Flexi Print-in-Place Frog Prince and Princess
?
Make’s quality:
5.0/5
(1 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating:
0/5
- 1 like
- 0 comments
Maker
3D Model
:format(webp)/https://files.cults3d.com/uploaders/15112864/illustration-file/18a08c7f-0ae9-4bf8-ba31-eb5757bd8a0f/Flexi-Factory-Frog-Prince-Princess.gif)
Make’s description
I printed the prince 1st and then the princess using the same filament and settings. Cura slicer
3D Printer
Anycubic VyperFilament
Anycubic sliky rainbow PLA- Raft: No
- Resolution: 0.15 mm
- Temperature: 205 ℃
- Support: No
- Infill: 25 %
- Speed: 70 mm/s
You have a problem with this Make?
Report a problem.
:format(webp)/https://files.cults3d.com/uploaders/26980528/photo-file/db2ce72c-8a8a-4aaf-8295-e378337395cb/FrogP.jpg)
:format(webp)/https://files.cults3d.com/uploaders/15985808/photo-file/a53c4215-744a-4601-b8c8-0e302245b2c1/Prince_Princess.jpg)
:format(webp)/https://files.cults3d.com/uploaders/18748670/photo-file/2389745f-9aa1-445b-b2b6-5cf0b5aac8eb/IMG_9978.jpg)
:format(webp)/https://files.cults3d.com/uploaders/22652258/photo-file/8380968b-b341-467b-8478-9f7de188a313/2022-07-18-05.46.08.jpg)
Add a comment