Devilbiss AF320 Compressor Replacement Fan # CAC-1148-1
- 0 likes
Made this for a friend out of PETG using supports, with a 0.5mm nozzle, 0.32mm layer height, 4 walls, 4 bottoms and tops (although in many places tha part was too thin for the full 4 walls or even all the tops and bottoms).
My friend installed it and it lasted about 0.2 seconds before completely disintegrating!
If I could add the mo4 of the epic failure I would.
Took 12 hours to print.
- Raft: No
- Resolution: 0.32 mm
- Temperature: 220 ℃
- Support: Yes
- Infill: 25 %
- Speed: 40 mm/s