Cute Flexi Print-in-Place Dolphin
?
Make’s quality:
0.0/5
(0 votevotes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
Your rating:
0/5
- 0 likes
- 0 comments
Maker
3D Model
:format(webp)/https://files.cults3d.com/uploaders/15112864/illustration-file/7083e27b-19ec-42bb-a180-66a076966665/dan_sopala_flexi_factory_dolphin.gif)
Make’s description
Another create model from this maker. Printed it at 100%, 50%, and even at 25% (not shown).
3D Printer
FLSun SRFilament
GNVTNTP Silk MagicPLA Purple-Silver- Raft: No
- Resolution: 0.16 mm
- Temperature: 205 ℃
- Support: No
- Infill: 15 %
- Speed: 100 mm/s
You have a problem with this Make?
Report a problem.
:format(webp)/https://files.cults3d.com/uploaders/27869685/photo-file/92a91ecf-c2bb-4fb1-b208-9f33c7b59ef7/20230507_164819.jpg)
:format(webp)/https://files.cults3d.com/uploaders/21281232/photo-file/756ff941-9f25-4d29-8dc4-883f460504b0/20230411_112158.jpg)
:format(webp)/https://files.cults3d.com/uploaders/14889989/photo-file/6b0522d9-193e-4cdd-9897-02dda00c1855/3DChristmas2022-003.jpg)
:format(webp)/https://files.cults3d.com/uploaders/24945444/photo-file/b2278a96-fea5-483b-860a-c38a042dbd28/il_570xN.3963917352_knfz.webp)
Add a comment