Skip to content

covid mask Mortal Kombat Scorpion 11 MK

Make’s quality: 5.0/5 (1 vote)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.
3D Model

Make’s description

Sliced in Cura, 23hr printing time.
Finished using a heated print finish tool to remove the supports.
Had to flatten the threads using the same and file (needle files) to create a pop fit.
Think I had problems with my y-axis at the time which didn't help. Tightened the belt since and sorted my bed levelling.
Wood filler for the rigged surface and finished with needle files and 120grit wet and dry.
Matt black acrylic undercoat and a acrylic paint job.
Silicone chin section poured around mask in a mould and then adhered after setting with silicone adhesive.
Top section lined with neoprene cut to shape to fit face (not the tidiest first go :-/)
Stuck with super glue nicely.
16mm black waistband elastic in the top holes only.

3D Printer

Ender 3 Pro


1.75mm black PLA
  • Raft: No
  • Resolution: 1.0 mm
  • Temperature: 210 ℃
  • Support: Yes
  • Infill: 100 %
  • Speed: 40 mm/s
You have a problem with this Make? Report a problem.

Other makes from the same 3D model

Add a comment