Blue Spirit Mempo
- 1 like
Used Meshmixer to slice it in half because I didn't want a 20hour print. Used Cura. Experimental supports turned on.
Glued with gorilla glue (any cyanoacrylate glue will work), sanded the seams and surface.
Washed print with water, dried, then handpainted with acrylics.
Weathered with watered acrylics. Sealed with clear matte spray.
Cut face mask elastics and tied them. Mouth piece is just black fabric hotglued in the corners.
- Raft: Yes
- Resolution: 0.16 mm
- Temperature: 200 °C
- Support: Yes
- Infill: 20 %