Skip to content

7-Segments

Advertising
?
Make’s quality: 5.0/5 (2 votes)
Evaluation of members on the quality of 3D print, material, post-processing, photo, etc.


Maker
3D Model
Advertising

Make’s description

-Sliced with Cura
-The process took about 70 hours print and assembly due to segment snapping needing fine-tuned and gears needing realigning.
-Printed smallest pieces at .16mm @ 20 mm/s; The rest was .2mm @ 50 mm/s
-Used hatchbox wood filament for case at 185 degrees. The rest was at 200 degrees.

Video of print and assembly : https://youtu.be/T7jEyFpdCC0

  • Raft: No
  • Resolution: 0.2 mm
  • Temperature: 200 ℃
  • Support: No
  • Infill: 15 %
  • Speed: 50 mm/s
You have a problem with this Make? Report a problem.

Other makes from the same 3D model

Add a comment

Advertising
100% secure payment with PayPal or Credit Card.