Yamaha Fazer 600 ('98-'02) headstock bearing nut socket
- 304 views
- 0 likes
- 3 downloads
3D model description
This splined socket will fit the splined nuts on the head stock bearing top cap of Yamaha Fazer 600 motorcycles 1998-2002. These nuts are found just below the top triple clamp, and the socket makes it possible to use a 32mm socket and torque wrench to properly adjust the play in the head-stock bearings. It may also fit other bikes, please let me know if you try it and it does!
Printed in PLA at 100um layer height, 1mm wall thickness and 40% infill the socket was just barely strong enough, it correctly torqued up the bearings to the full preload of 57Nm, but broke apart on removal, with higher infill or stronger materials it should be possible to print a re-usable one.
- 3D file format: STL
- 3D model size: X 50 × Y 50 × Z 50 mm
- Publication date: 2020/10/27 at 17:45
Electronics Engineer from Reading with some Mech.Eng. training. Mostly doing 3D printing for work making assorted parts for high-voltage assemblies but also designing and printing random items I find useful. Strong preference for keeping the entire toolpath open-source but will use commercial software where it's really needed.
I also do a lot of 3D design work for rLab, Reading's hackspace to help with maintaining the supporting the equipment and keeping the building clean.
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!