A piece designed to be printed full scale.
There is a bore hole through the entire model for a dowel or rod to add strength for that extra quality finish.
each Sword fragment has two additional holes at each end intended for finishing nails or thin metal rods/ stiff wire. these are to keep the sword straight and true.
Something simple light black electrical tape will give the desired look for the handle. alternately thin leather stuck with hot glue would really make the prop.
Additionally each gem can be used as a vacuum mold if scaled down a touch.
The sword is currently quite large, consider what scale you want before printing
Edit: added much needed detail to the hilt
use at least 3 walls and >15% infill for a strong built. The layer height will depend on the piece. There is fine detail on the guard. I would not recommend splitting the guard if you want the best detail. Which mean you'll need supports for the guard
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!