Wheel set for ESM F7F Tigercat.

EDIT:
Upgraded the design for easier printing.

Semi-scale wheels for the 1:7.5 scale ESM F7F Tigercat.

The parts include:
Inner and outer hub halves for the main wheels.
Center cap for the main wheel.
Main tire.
Nose wheel (print 2x).
Nose tire.

Video of my plane with the wheels:
https://www.youtube.com/watch?v=7HlKJdslank

Video of my nose wheel:
https://youtu.be/uKHXzVsbTSE

For personal use only, not for resale.

The wheels should be printed with support and screwed together by self threading screws. I used #2 servo screws. Cut 5x6mm brass tubing and insert in the center to work as a bearing surface.

The tires should be printed from some for of TPE. I printed mine at 0.12mm layer height with two perimeters and 12% infill. I recommend higher infill, about 25%. I used 24 top layers and 15 bottom layers.

To achieve good bed adhesion with TPE I recommend covering the relevant area of the bed with double sided scotch office tape. This works very well for rubber materials.