Skip to content

Wetsuit hanger

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Robust wetsuit hanger.

No more moulded wooden hangers, no more broken plastic hangers.

This wetsuit hanger was designed to withstand wet and heavy neoprene suits that need drying or storage.

Wide shoulders should prevent unnecessary material stretching.

Hook mount design should prevent pullout.

This is easily printable with ABS on Replicator 2x using 0.3mm resolution, 2 shells and 30% infill. I have used HIPS supports for 'Neck' and 'Link' parts.

'Shoulders', 'Neck' and 'Hook wedge' need gluing before assembly. I have used acetone/ABS self made glue mix.

Attempts to print 'Shoulder' parts with supports on R2x result in failed prints - some kind of positioning glitch secondary to size of the model (Makerware slicer).

Bear in mind that this hanger (made with above settings) will use approx 365g of ABS material (about $11 filament cost) and will take just under 17h to print....

  • 3D file format: STL
  • Publication date: 2019/05/29 at 15:06



Designs 34
Downloads 3.2k
Followers 21



Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!