Volvo Wheelnut Cap with R-design logo
- 1.7k views
- 3 likes
- 46 downloads
3D model description
#Wheelnut Cap Replacement for Volvo#
My Volvo V40 R-design (MY13) had these original wheelnuts with a stainless steelcap over them. They are not supposed to come off since they are pressfitted on the wheelnut at the factory. Its a common problem they fall off after a while. Didnt look good with several caps missing, so i designed some replacement caps that snaps onto the groove in the original wheelnut, and replaced all of the steel caps.
The nut itself is 18mm, and with the stainless steel cap on 19mm. On later models Volvo replaced these steel caps with plastic ones.
I printed theese with black PLA, no support, 0.15 resolution and 100% infill. Orient them with the "R" down on the printbed. They snaps on perfect directly from my printer. If it doesent fit snug enough from your printer, try making minor scale adjustments.
- 3D file format: STL
- Last update: 2020/10/19 at 15:50
- Publication date: 2019/11/04 at 13:07
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!