This is a v-shaped bicycle accessory bar. There are plenty of t-shaped accessory bars but they did not have the ability to house my light, iPhone and HD-Camera at the same time. The design is optimised so as not to require supports and it is as solid as a rock even with 10% infill. Very little vibration.
Requires two 3/16" x 50mm bold and nut to hold together
I designed on tinkerCad and the resultant STL has been run through NetFabb.
ReplicatorG used for slicing with following settings:
Supports - None
Object infill - 10%
Layer hight - 0.34
Number of shells - 2
Feedrate - 40
Travel rate - 56
Print temperature - 230
Printed on Makerbot Replictor 2. Make sure you have sandpapered the plate so it sticks like glue.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!