Since several people mentioned having trouble printing the original clamp as a single piece - what with the pieces fusing together and all - I decided to separate this into two individual pieces assembled with a nut and bolt. You will need an m3 x 15mm long bolt, a 3mm nut and a couple of 3mm washers, although the washers are optional.
Harley Quinn would be so proud!
FYI - I find that adding a drop of nail polish to the end of the threads of the bolt before and after snugging the nut down will keep the nut from backing off during use. Alternatively, you could also use a nyloc nut.
I am a self-proclaimed know-it-all. I will tackle any project regardless of my experience, or lack thereof. Always ready to learn something new. With over 25+ years experience in electronic repair and 10+ years experience in small engine / ATV / motorcycle repair, there is nothing I can't fix, modify or build.
Why a pepper? In case anyone is curious as to why there is a hot pepper embossed into most of my designs... My nickname is Pepper and that little pepper logo is a hell of a lot shorter than "Copyright © 2017 by Derek J.G. Tombrello" which is how I usually sign my work :)
In addition to PayPal.me donate using bitcoin via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx --or-- dogecoin at: DEKT6CjdR3uAKQjmiGteTAg8gvKphY9tw5
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!