Skip to content

TRINITY repeating Crossbow

3B72434B-0641-4179-B1F9-20CF00474288.jpeg 3D file TRINITY repeating Crossbow・3D print design to download
342045586_259207839997159_7454427736205117737_n.jpg 3D file TRINITY repeating Crossbow・3D print design to download
Share
Add to
Make
?
Creation quality: 4.4/5 (10 votes)
Evaluation of members on the printability, utility, level of detail, etc.

Designer

extremedesigns

extremedesigns

3D model description

Join my group @ https://www.facebook.com/groups/1423143871848946/?ref=share&fs=e&s=cl

CHECK OUT MY GRIZZLY CROSSBOW BEFORE PURCHASING THIS ONE, it’s 100% better then this one

Trinity comes in a crossbow, bow and slingshot versions

TRINITY is the first of its kind( 3in1 crossbow) that goes from shooting balls to bolts by switching out the Magazines that are attached by 2 bolts or quick release pins. its very strong and sturdy with fast shooting for all 3 magazines (even with a 110lbs limb), its also easy to service the string and rails by having the removable magazines that takes secs to remove or put on

it is fun for target practice in the backyard, camping or any safe place to do so. you can shot all 18 bolts in 10secs or have 100+ steel or clay balls in the mag to shoot. it can be use for small game hunting and sport but its all on your rules and regulations in your country, do your research before doing so please

MAGAZINES included:
Ball magazine that holds 100+ 11mm to 12mm Steel or clay balls, also has a TPU liner for the magazine to reduce noise
Double row that holds 18 6.5 or 6.5 Bolts that can also hold 18 broadhead bolts
7.5bolt magazine that holds 8 ADDER BOLTS

you can pick from Crossbow, Bow and slingshot/rubberband for shooting styles

https://youtube.com/shorts/t0KpF1w4WYU?feature=share

https://youtube.com/shorts/E8JpYcIa58s?feature=share

TRINITY size:
Handle and Body 360mm
With Stock 600mm minimum
I recommended 80lbs limb or smaller

Important:
this is for RESPONSIBLE ADULTS ONLY!!!
I assume no liability for any damage or injury of any kind, use at your own RISK and be responsible with it!!!

Make sure it is legal in your country and your age!!

Recommended Material:
PLA+, PETG

Supplies NEEDED:
M4 6mm x4
M4 8mm x8
M4 30mm x8
M4 50mm x5
M4 .70 nuts, no locking nut
Hex socked heads:

M3 20mm x2
M3 25mm x22
M3 .70 nuts, no locking nuts
Compression Springs:
1x9.5x10mm x1
8x20mm x2 one for stock if you build
5/32x.023x 9/16 spring x1 can be a little bigger or smaller
Tension Spring
4x10mm cut it to size

HAVE FUN AND PLAY SAFE

3D printing settings

Anything under 249x249 bed size can print the slit body version, feel free to contact me and I will have it able to fit on your bed size within that day
Cocking arm and Trigger print at 90% infill
all other parts 30% infill or greater
Wall Thickness 2.25
Wall count 6
Top/Bottom Thickness 1.2
Top/Bottom layers 6
All parts are printed without supports besides foregrips, Magazines and Rails

BAMBU LAB:
Wall loops 15
Top & bottom shell layers 9
Top shell thickness 2.25
Bottom thickness 2.25
Infill 30%
With the bambu I recommend printing on silent mode for the first 10 layers minimum when you’re printing the body and rails due to bambu printers creates
a LOT weaker prints than the slow printers

its very easy to print and put together
Takes just over a roll of filament to print it all
To pring everything it takes about 90hours on a slow printer and 50 on a fast printer

3D printer file information

  • Design number: 1142263
  • 3D design format: ZIP Folder details Close
    • TRINITY JUNE14.zip
      • 18Bolt mag scope picatinny rail.stl
      • Body/BAMBU AMS BODY/TRINITY body (LEFT.stl
      • Body/BAMBU AMS BODY/TRINITY body (RIGHT.stl
      • Body/Body (LEFT.stl
      • Body/Body (RIGHT.stl
      • Body/BODY for two thumbscrews/Body with plate holes (LEFT.stl
      • Body/BODY for two thumbscrews/Body with plate holes (RIGHT.stl
      • Body/BODY for two thumbscrews/Body without plate holes (LEFT.stl
      • Body/BODY for two thumbscrews/Body without plate holes (RIGHT.stl
      • Body/BODY for two thumbscrews/Thumb screw 35mm.stl
      • Body/Body with skirt (LEFT.stl
      • Body/Body with skirt (RIGHT.stl
      • Body/Rubber band body/Rubber band body (LEFT.stl
      • Body/Rubber band body/Rubber band body (RIGHT.stl
      • Body/TRINITY Plate for body.stl
      • Handles & Foregrip/Foregrips/Bow foregrip/Bow foregrip (LEFT no locking.stl
      • Handles & Foregrip/Foregrips/Bow foregrip/Bow foregrip (RIGHT no locking.stl
      • Handles & Foregrip/Foregrips/Foregrip (LEFT.stl
      • Handles & Foregrip/Foregrips/Foregrip (RIGHT.stl
      • Handles & Foregrip/Foregrips/Foregrip bigger hands (LEFT.stl
      • Handles & Foregrip/Foregrips/Foregrip bigger hands (RIGHT.stl
      • Handles & Foregrip/Handle (LEFT.stl
      • Handles & Foregrip/Handle (RIGHT.stl
      • Handles & Foregrip/Handle Stock Release button.stl
      • Helper to put string on limb/String helper to put limb on.stl
      • Laser and flashlight holders/15mm Laser holder.stl
      • Laser and flashlight holders/19mm laser 26mm flashlight holder.stl
      • Laser and flashlight holders/19mm laser holder.stl
      • Laser and flashlight holders/26mm flashlight holder.stl
      • Laser and flashlight holders/Side piece for mount.stl
      • Limb holders (Left.stl
      • Limb holders (Right.stl
      • Mag and Rails/100+Ball Mag/Ball mag (LEFT.stl
      • Mag and Rails/100+Ball Mag/Ball Mag (RIGHT.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/Ball Mag (Sort Picatinny rail.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/Ball mag (Tall picatinny rail.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/Ball Mag cap.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/Ball Mag insert (LEFT print with TPU.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/Ball Mag insert (RIGHT print with TPU.stl
      • Mag and Rails/100+Ball Mag/Mag Parts/BALL MAG SIGHT.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt double row (LEFT.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt double row (RIGHT.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt mag longer picatinny/18Bolt double row (LEFT Bigger picatinny.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt mag longer picatinny/18Bolt double row (RIGHT Bigger picatinny.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt mag longer picatinny/18Bolt double row (Short Picatinny rail.stl
      • Mag and Rails/6.3 18Bolt Mag/18Bolt mag longer picatinny/18Bolt double row (Tall Picatinny rail.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/6.3 picatinny 58mm long.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Arrow locking arm TRINITY.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Arrow locking arm.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Mag parts 1 and 2.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Mag parts Lock.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Picatinny scope rails.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/picatinny side rail.stl
      • Mag and Rails/6.3 18Bolt Mag/Mag parts/Sight.stl
      • Mag and Rails/7.5Bolt Mag/7.5 MAG (LEFT without scope rails.stl
      • Mag and Rails/7.5Bolt Mag/7.5 MAG (RIGHT without scope rails.stl
      • Mag and Rails/7.5Bolt Mag/Mag parts/Arrow lock 7.5.stl
      • Mag and Rails/7.5Bolt Mag/Mag parts/Mag parts 1 and 2.stl
      • Mag and Rails/7.5Bolt Mag/Mag parts/Mag parts Lock.stl
      • Mag and Rails/7.5Bolt Mag/Mag parts/Side picatinny rail.stl
      • Mag and Rails/Mag rails/Arrow rail insert (Start with thinner side rails.stl
      • Mag and Rails/Mag rails/Arrow rail insert (Use after worn in thicker side rails.stl
      • Mag and Rails/Mag rails/Mag Rails (LEFT.stl
      • Mag and Rails/Mag rails/Mag Rails (RIGHT.stl
      • Mag and Rails/Mag rails/NEW Cocking arm.stl
      • Mag and Rails/Mag rails/NEW Trigger.stl
      • NEW FOREGRIP (LEFT.stl
      • NEW FOREGRIP (RIGHT.stl
      • NEW HANDLE (LEFT striker.stl
      • NEW HANDLE (RIGHT striker.stl
      • Rubber for 5mm thickness (print with TPU).stl
      • Rubber for 7mm limb (print with TPU.stl
      • Split Parts for 249x249 or smaller print bed/18Bolt/18Bolt Split (LEFT PT1.stl
      • Split Parts for 249x249 or smaller print bed/18Bolt/18Bolt Split (LEFT PT2.stl
      • Split Parts for 249x249 or smaller print bed/18Bolt/18Bolt Split (RIGHT PT1.stl
      • Split Parts for 249x249 or smaller print bed/18Bolt/18Bolt Split (RIGHT PT2.stl
      • Split Parts for 249x249 or smaller print bed/BODY/220x220 Body (LEFT Part 1.stl
      • Split Parts for 249x249 or smaller print bed/BODY/220x220 Body (LEFT Part 2.stl
      • Split Parts for 249x249 or smaller print bed/BODY/220x220 Body (RIGHT Part 1.stl
      • Split Parts for 249x249 or smaller print bed/BODY/220x220 Body (RIGHT Part 2.stl
      • Split Parts for 249x249 or smaller print bed/Rails/Split rails (LEFT pt1.stl
      • Split Parts for 249x249 or smaller print bed/Rails/Split rails (LEFT pt2.stl
      • Split Parts for 249x249 or smaller print bed/Rails/Split rails (RIGHT pt1.stl
      • Split Parts for 249x249 or smaller print bed/Rails/Split rails (RIGHT pt2.stl
      • Stock/Buttend.stl
      • Stock/Stock part needs .6x8x20mm spring.stl
      • Stock/Stock part.stl
      • Stock/Stock.stl
      • Stock/Trinity Stock adapter.stl
      • TRINITY INFORMATION.pdf

    Learn more about the formats

  • Last update: 2023-06-14 at 21:39
  • Publication date: 2023-03-30 at 09:01

License

CULTS - Private Use

Tags

Issue with this design? Report a problem.

Other 3D models from the same designer extremedesigns

All

Best 3D printer files of the Sports & outdoor category

Best sellers of the category Sports & outdoor

Add a comment

21 comments

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Currency: USD
Cults.
100% secure payment with PayPal or Credit Card.