- 5.3k views
- 44 likes
- 155 downloads
3D model description
An attempt to create a travel ukulele
I tried to make it as simple as possible using glue and only 1 screw.
The tuners I bought on Aliexpress link below:
The screw I used was an M5x80mm with a nut to hold the pulleys.
My printer is 225x225mm and I was able to print on the edge of the bed. So I believe that any printer of that size will also be able to print.
Due to the high tension of the strings it is important to print the neck and body with a high infill and at least 6 walls (if you can put 8), otherwise the pressure will warp the ukulele
In the region of the tuners I recommend doing a 100% filling using a modifier in the slicer, I attached an image of PrusaSlicer as an example.
Please visit my profile to see my other models:
Share my creations is the way I found to contribute and thank the help I've always had from the 3D printing community.
I'll try to keep the posts consistent, but if you'd like to help me out with a tip, please use the link below. Thanks!
3D printing settings
3D printer file information
3D design format: STL Folder details Close
2022-02-27 at 01:03
?Published to Thingiverse on: 2022-02-26 at 23:43
Best sellers of the category Various
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!