Skip to content

Tim Postma's Reinforced Slingshot

Download free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-PostmaDownload free 3D print files Tim Postma's Reinforced Slingshot, Tim-Postma
Download free 3D print files Tim Postma's Reinforced Slingshot, Tim-Postma

Did you 3D print this model?

3D model description

This is the latest current slingshot of Tim Postma (Windsor , Ontario Canada)as of december 19th 2019 & is released for transparency & as a regular release

This slingshot versatile for various for things as projectiles to hit targets

You can also use the old pellets such as from the pellet pack , the bullet bill , or other magnum pellets or you can also use environmentally friendly ammunition like beans , grapes , for a paintball effect shoot out berries

WARNING SLINGSHOT IS ONLY SAFE IF HANDLED PROPERLY ,SAFELY & RESPONSIBLY AND AT YOUR OWN RISK & EVERY SHOOTER ARE RESPONSIBLE FOR WHAT YOU SHOOT AND DO NOT BE RECKLESS OR MISUSE AS RECKLESS OR MISUSE CAN BE DANGEROUS , DO NOT LAUNCH WHEN UNDER THE INFLUENCE

AND CHECK YOUR LOCAL LAWS ALSO BE A GOOD CITZEN AND RESPECT PROPERTY AND NEVER BE CRUEL)( WEAR EYE PROTECTION BEWARE OF RICOCHETS, ADDITIONALLY KNOW YOUR SURROUNDINGS & INTEGRITY OF THIS DESIGN IS ALSO CRITICAL, BY DOWNLOADING OR POSSESSING THESE DESIGNS OR THE 3DPRINTS MEANS ITS ASSUMED YOU UNDERSTAND AND READED THESE AND AGREED BY THESE RULES AND IGNORANCE IS NO ACCEPTABLE EXCUSE

***INSTRUCTIONS (updated

( for using x2 size 117B rubber bands)

1st get two rubber bands (one on each end you need to single loop knot in the hole(on opposite directions) and do the same for the other end) that way its secure

2nd step is to make the pouch so while keeping the rubber bands secure layout a small piece of duct tape & sandwich each rubber band on each end of the length with the middle being pre-laminated (this is the easiest way so far)

3rd now you are finished making the slingshot

*also a strip of cut long enough rubber bands tied will also work

3D printing settings

  • it might sometimes be easier to 3dprint this on a glass plate then a metal plate, if not an adhesive or a build surface product like buildtak might make things easier
  • also this design is pretty strong and durable & tough pla should be plenty
  • 3D file format: 3MF and STL

Tags

Creator

Designs 31
Downloads 526
Followers

I am a caring Canadian , who likes math , logic , open debates , & really takes a big sedimental value to my ideas & designs as a kid i was very cerious guy who would read encyclopedias , & i still love documentries , i love collecting odds & ends of infomation which people described as a lot of reading , i am a guy who can always find a way , and a shadow of the past & who can think in ways most people cannot
I am the same guy as pinshape’s Tim (Timster Postma), pin shape’s Tim Postma
I also like messing with people as my way of a personal bond , so if you see me messing around understand its out of my heart of gold & that its just play for me

I also am a huge defender of innocent childplay without adults meddling or interfering unless there is a moral , ethical or legal issue

If there is something i treasure its the innocence of a person who are a young children or a special innocent people

License

CC BY NC ND

Best sellers of the category Various

Related contents


Add a comment

2 comments

‪But only for this special circumstances of a occasion i will do this is a fb messager group & let people join because otherwise it will be too complex , i will give you the .3mf‬

just a heads up anyone who downloaded my reinforced slingshot & did not get the .3Mf yet & you downloaded before monday may 25 2020 by 9am send me a message on my fb @timsterPostma & i will send it to you if i cant i can do email & because this is the right thing to do , it should be available by 2:45-3 pm toronto time to as long as i want that .3mf up


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!