Skip to content

STRV 103C

thumb.jpg STRV 103C
DSC01823.jpg STRV 103C
DSC01824.jpg STRV 103C
DSC01826.jpg STRV 103C
DSC01828.jpg STRV 103C
DSC01844.jpg STRV 103C
DSC01842.jpg STRV 103C
r1.png STRV 103C
r2.png STRV 103C
r3.png STRV 103C
r4.png STRV 103C
r5.png STRV 103C
Advertising
Share
Add to
Make
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.1k views
  • 11 likes
  • 15 downloads
  • 1 collection
  • 2 makes
Licence CULTS - Private Use
Publication date 2023-09-24 at 08:14
Design number 1470564
3D design format
ZIP Folder details Close
  • strv103c.zip
    • hull/arch_left.stl
    • hull/arch_right.stl
    • hull/bottom_front.stl
    • hull/bottom_front__hooks.stl
    • hull/bottom_main.stl
    • hull/bulkhead.stl
    • hull/bulkhead__mount_switch.stl
    • hull/cut/arch_left_1.stl
    • hull/cut/arch_left_2.stl
    • hull/cut/arch_right_1.stl
    • hull/cut/arch_right_2.stl
    • hull/cut/connector_pin.stl
    • hull/cut/side_1.stl
    • hull/cut/side_2.stl
    • hull/exhaust.stl
    • hull/exhaust_pipe.stl
    • hull/exhaust_protector.stl
    • hull/floor_left.stl
    • hull/floor_right.stl
    • hull/front.stl
    • hull/hatch_commander.stl
    • hull/hatch_commander_arms.stl
    • hull/hatch_driver.stl
    • hull/hatch_driver__arms_front.stl
    • hull/hatch_driver__arms_rear.stl
    • hull/rear.stl
    • hull/side.stl
    • hull/top_main.stl
    • hull/top_rear.stl
    • spec.xlsx
    • stuff/blade.stl
    • stuff/blade__arm.stl
    • stuff/blade__servo_mount.stl
    • stuff/cargo.stl
    • stuff/cargo_pin.stl
    • stuff/front_protector__inner.stl
    • stuff/front_protector__outer.stl
    • stuff/front__light.stl
    • stuff/front__light_protector.stl
    • stuff/front__mg_1.stl
    • stuff/front__mg_2.stl
    • stuff/handle_larger.stl
    • stuff/handle_smaller.stl
    • stuff/hatch_commander__smoke.stl
    • stuff/hook.stl
    • stuff/hook_pin.stl
    • stuff/mg.stl
    • stuff/mg_stand.stl
    • stuff/side_niche__front.stl
    • stuff/side_niche__middle.stl
    • stuff/side_niche__pipes_1.stl
    • stuff/side_niche__pipes_2.stl
    • stuff/side_niche__rear.stl
    • stuff/skirt_front.stl
    • stuff/skirt_main.stl
    • stuff/top_rear__hydro_main.stl
    • stuff/top_rear__hydro_piston.stl
    • stuff/track_paperclip_measure_40mm.stl
    • suspension/drive_sprocket.stl
    • suspension/elevation_arm__front_bottom.stl
    • suspension/elevation_arm__front_top.stl
    • suspension/elevation_arm__rear_bottom.stl
    • suspension/elevation_arm__rear_top.stl
    • suspension/elevation_mount.stl
    • suspension/hub__cover.stl
    • suspension/hub__lever_inner.stl
    • suspension/hub__lever_outer.stl
    • suspension/idler.stl
    • suspension/idler_cover.stl
    • suspension/idler_mount.stl
    • suspension/lever.stl
    • suspension/motor_housing_lower.stl
    • suspension/motor_housing_upper.stl
    • suspension/support.stl
    • suspension/support__mount.stl
    • suspension/support__rubber.stl
    • suspension/support__rubbered.stl
    • suspension/torsion_hard.stl
    • suspension/torsion_hard_extra.stl
    • suspension/track.stl
    • suspension/wheel.stl
    • suspension/wheel__cover.stl
    • suspension/wheel__rubber.stl
    • suspension/wheel__rubbered.stl
    • turret/barrel_1.stl
    • turret/barrel_2.stl
    • turret/muzle_brake.stl
    • turret/recoil_arm.stl
    • turret/recoil_servo_mount.stl

Learn more about the formats
RC_3D_Tanks

RC_3D_Tanks

3D printer file info

3D model description

Fully functional radio controlled model of STRV 103.
Can be turned into stand model by using plastic gearbox rod (check Google Drive)

Manual, electronics │Live preview | Video

Based on Heng Long TK-7.1. Does not support BB unit.
supported:
- GA25 motors (150-300rpm)
- canon lifting
- smoke
- fully functional suspension
- recoil and blade SG90 servo, elevation 996 servo

Some numbers:
scale: 1/16
width: 220mm
length: 460mm
height: 130mm
weight: 2,300 g
required printer area: 220x220

Please contact us on Discord in case of any troubles

3D printing settings

PETG is preferable filament. Use 40-50% infill for levers

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs
Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!
Advertising
Currency: USD
Cults.
100% secure payment with PayPal or Credit Card.