Skip to content

Steampunk hinge

3D model description

Steampunk project hinge. This is amazingly strong as I would rate them as having at a minimum a 15-20 lb/ 7 kg capacity. 1.75 mm filament is used as the hinge pin. Printed in ABS at .3 mm resolution. I used it for a BBQ cabinet but they would work great for boxes or cabinets large and small. For a finish I coated with acetone mixed with copper powder as a first coat and then 1/2 carpenters glue 1/2 water with copper powder again. Anticipate it will change color and go green with humidity which is the desired effect. Copper polishes nicely with soft dremel tools

3D printing settings

Printed in ABS at .3 mm resolution. For a finish I coated with acetone mixed with copper powder as a first coat and then 1/2 carpenters glue 1/2 water with copper powder again. Anticipate it will change color and go green with humidity which is the desired effect.

  • 3D model format: STL

Creator

Followers Following 3
Downloaded 29
Sales $49

Copyright

©

Similar 3D files


Add a comment