Spotlight GU5.3

I needed a small spotlight for something and realized I had some nice LEDs with GU5.3 socket, ment for 12 volt.

Hardware needed:
2x small screws for fixing the socket to the skirt thing, I used M3 with a small head.
1x M4x15 or equivalent as horizontal hinge.
1x M3x12 or equivalent as vertical hinge.
1x M3 nut for the above.

You'll of course also need a GU5.3 lamp and the socket itself.

I haven't tried this with halogen lamps and I wouldn't recommend it unless they are very low power(<10W) or you print it with a plastic that can withstand higher temperatures.

Check my youtube channel to see how it was made and how to assemble it!
http://www.youtube.com/c/MrCrankyfaceProjects

Check me out at:
Youtube: http://www.youtube.com/c/MrCrankyfaceProjects
Instagram: https://www.instagram.com/mr.crankyface/
3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyface
Patreon: http://patreon.com/Mrcrankyface