FG silhouette rocket with its launch pad. 1/60th scale. manned flight for missions to the ISS. 243 parts. dismountable into 26 parts. interior of tanks and engines detailed. vessel silhouette in 3 parts.
editing video: https://youtu.be/AMI-aarnLOI
file name: number, color, quantity.stl
requires a good knowledge of your printer.
Preferably print all parts on the same printer to ensure better dimensional retention.
Some parts may require 5 to 6 hours of printing time
the adhesion of the parts must be controlled in general.
The modeling was tested on an i3 with a 0.4mm nozzle.
First layer imperative at 0.3mm and must be regular over the entire printing surface (autoleveling desired)
layer height 0.2 mm for large parts. 0.1 or 0.15 mm for small parts.
No support required.
15% filling if necessary. 0% on thin walls.
Brim imperative on thin walls.
Edge thickness for thin parts at 0.4mm (single nozzle passage)
edge thickness for other parts at 0.8 or 1.2 mm as desired.
for the airbrakes of the cap, print with 0.8mm of wall thickness. do not print the bottom or the top. the filling with a 40% square grid pattern and oriented at 45°.
Page translated by automatic translation. Suggest a better translation