Skip to content

FILAMENT WELDING STAND

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 771 views
  • 16 downloads

3D model description

With this model we can join strands of 1.75 mm and use our material to the end.

It is designed to use a piece of Capricorn PTFE tube of 4 mm outside diameter and 2 mm inside diameter and 1.75 mm filament.

The idea is to assemble the Capricorn tube as shown in the pictures and put one end of the filaments to be soldered on each side. We will use the flame of a small candle (recommended) or a lighter to heat the center of the Capricorn tube for a few seconds pushing the two strands towards the center. Wait until it is completely cool and push the shorter side of the filament out of the holder.

The part where the filaments have been joined will have approximately the inside diameter of the Capricorn tube, we should sand it a little so that it slides effortlessly through our printer guide tube.

We may have to repeat the process if the filaments don't stick well the first time. With a little practice you will get strong bonds in a few seconds.

I've tried it with PLA and PETG.

This model is free, if you feel the work has been worthwhile you can support me using the donate button.

I will address any questions in the comments.

In the spirit of improving my work, I would appreciate it if you could rate the quality of the creation.

Thank you for your attention.


3D printing settings

Layer: 0.2

Supports: Yes (as it is oriented)

Backfill: 20-30%.

Speed: 40 mm/s (recommended for PETG)

PLA 210º Bed: 60

PETG 235 Bed: 92º (recommended)

I'll address any questions in the comments.

Thank you for your attention.

3D printer file information

  • 3D design format: STL Folder details Close
    • STL_SOP_SOLD_FILAMENT.stl

    Learn more about the formats

  • 3D model size: X 68 × Y 28 × Z 10 mm
  • Publication date: 2021/09/23 at 12:19

Tags

Creator

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!