Skip to content

SCX10 Twin I-Beam Suspension

?
Creation's quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 9.3k views
  • 24 likes
  • 22 downloads

3D model description

These files allow you to put prerunner style suspension on your SCX10 based vehicle. For the most part the pieces bolt into existing holes in the chassis rails however they do require drilling some new holes in the frame to mount some of the parts (steering rockers being one of them). The extra holes haven't been a problem thus far after extensive testing.

All bolts, tie rod ends, and threaded rod used are M3 size of varying length, I don't know the exact lengths or quantities since I built it using leftover parts but a pack or M3 threaded rod and an assorted M3 bolt pack will most definitely cover all of the bolts and rods required to assemble the suspension.

The steering knuckles are SCX10 knuckles using SCX10 front half shafts with the shaft section removed leaving only the hub to mount the hex and wheel.


3D printing settings

All parts were printed out of PETG with a 0.4mm nozzle, most of the parts were printed at 0.2mm layer height with 30% infill for strength. Lower layer height and higher infill will make the parts even stronger but parts printed with these settings will be plenty strong for most driving, just avoid large rocks and obstacles that will sheer off the beams.

3D printer file information

  • 3D design format: ZIP Folder details Close
    • Twin I-Beam Suspension.zip

    Learn more about the formats

  • Last update: 2019/09/27 at 14:32
  • Publication date: 2019/09/12 at 21:31

Copyright

©

Tags

Creator

Issue with this design? Report a problem

Best sellers of the category Various


Add a comment

One comment

Would this work on a scx10ii chassis? I'm not familiar with the differences.


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!