Remix trays mk3 DE 200
- 712 views
- 2 likes
- 38 downloads
3D model description
Hello everyone I am here to present my remix mk3 platters for discoeasy.
it is composed of 4 angle coming to fix on the old plate then you come to arrange your 4 screws of the heating plates with spring in the holes being at the end.
For the curious yes that the trays heat is that the parts are plastic it may not melt! according to the tests performed in simulation and my side irl his move not, the parts begins to melt from 180 degree we speak of 60 degrees so the heat will go through the screws so decrease again then by the plastic then by the old tray what will happen the parts will certainly a heated but not enough to break ..... after if you're suspicious you can very well add something heat sink
3D printing settings
not printed flat but has 90 * c
- 3D file format: STL
- Publication date: 2018/03/25 at 11:35
Page translated by automatic translation. See the original version.
Best sellers of the category Various
Add a comment
Would you like to support Cults?
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.