Skip to content

Race/Drift Vintage VW Pickup Body 257mm wheelbase

Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.


3D model description

Inspired by many vintage VW's and slammed trucks all around google. This is my take on this cool old truck.

200mm wide
257mm Wheelbase
The Wheelbase can lightly be adjusted by changing the length of the center pieces. Just remember to uncheck the "Constrain Proportions" so as to only change the length.

I included the full one piece body as well.
The separate parts are oriented for the least supports.
The body can be held together using M2 screws and nuts while the glue dries. Most of the cuts were chosen where there would normally be seems so no filler would be needed in those areas.

The rear lenses can be printed in one or two parts.
in 2 parts = top in clear amber-Bottom in clear red using white LED's. This will give a more Vintage Look.
in 1 part print in clear and use Amber/Red coloured LED/s More modern

front Lights...
Markers.. 10mm amber LED
Get 2 x 9 LED Flashlight at the $1 Store and use a pair of cutters to open up the LED section. Use the Lens and LED's and wire a 4.5 Volt source to them. Once I am done printing I will make a video of any details.

Once the Front Light Bezels have been printed you snap the blue part off. See pictures.

I am currently printing it and will post pictures once assembled.

3D printing settings

Print at high resolution 0.05 to 0.15 for best results.
Parts should already be oriented upon import to your Slicer.

3D printer file information

  • Design number: 990278
  • 3D design format: STL Folder details Close
    • Body Cab.stl
    • Body Left Lower Center.stl
    • Body RIght Lower Center.stl
    • Body Rear.stl
    • Body Roof Left.stl
    • Body Roof Right.stl
    • Body Upper center.stl
    • Body_rear.stl
    • Front Light Bezel 1.stl
    • Front Light Bezel 2.stl
    • Front Light Buckets.stl
    • Front Light Covers.stl
    • Full Body.stl
    • Rear Light Bucket.stl
    • Rear Light Lower Lens.stl
    • Rear Light Single Lens.stl
    • Rear Light Upper Lens.stl

    Learn more about the formats

  • Publication date: 2023-01-02 at 23:25


CULTS - Private Use


Issue with this design? Report a problem.

Best 3D printer files of the Various category

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!