I present you with the "rabbit puzzle" key ring.
I created this key ring because my daughter wanted an original key ring
key ring "rabbit puzzle" measures 5.8 cm by 5.2 cm and 2.3 mm deep, printing time 38 min
the puzzle keychain is very funny to make but not very practical: -)
you will have to deburr very slightly each end for a better insertion, but be careful too much deburring and more hooks possible.....
On the picture I printed "skin" on purple and green on alumina black (with my cr10, in the middle of the printing time, I changed the filament, put purple (for example) and restarted)
when you have printed 50% of the print on cr10 press the button
then "change filament"
switch on another coil
and press the button again
the impression this relaunch...... good impression
sovb3d filament black alumina and purple
100% filling rate
20% printing speed not too fast for better rendering
215 ° PLA printing temperature
60 ° plateau temperature
0.1 layer thickness
1.2 hull thickness
1.2 thickness above/below
je modélise depuis janvier 2017, c'est devenu ma passion...
la créativité c'est l'art d'accomplir ces reves
ma page facebook : https://www.facebook.com/catf3d/?modal=admin_todo_tour
I model since January 2017, it became my passion ...
creativity is the art of accomplishing these dreams
my facebook page: https://www.facebook.com/catf3d/?modal=admin_todo_tour
Page translated by automatic translation. Suggest a better translation
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!