This is small Popper type fishing lure. The lure is printed in two halves and then glued together.
There are two different version each with slightly different popper faces (everything else is the same).
(3) Alignment Pins (made from 1.75mm filament)
(3) #6 Figure 8 Hook Hangers (Available from https://lurecomponents.worthco.com)
(2) .177 BB's
I used #6 Treble Hooks w/ #3 Split Rings
Drill and Bits (1.8mm or a 5/32")
CA Glue (superglue)
Epoxy (to seal everything up)
IF there are any problems with the STL's or you have questions please let me know.
I print this lure in PLA+ with the following settings
(You'll have to experiment with what works best for you.)
Layer Height = .10mm
Top Solid Layers = 4
Bottom Solid Layers = 2
Outline/Perimeter Shells = 2
Supports = I do not use them but you can if you need too.
Infill = 80% (you can experiment with different infill rates to achieve different flotation)
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!