Skip to content

PMR-2 mine

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is replica of Yugoslav variation on soviet POMZ anti-personnel mine.

The mines consist of a small TNT explosive charge inside a hollow cylindrical-cast iron fragmentation sleeve. The sleeve has large fragments cast into the outside and is open at the bottom to accept the insertion of a wooden or plastic mounting stake. On top is a weather cap, covering a standardised fuze well, which in operation is normally armed with an MUV or VPF tripwire fuze. The tripwire can be set to detonate via both pressure or pressure release.

The POMZ-2M has a threaded fuze well, while the earlier POMZ-2 was unthreaded and the fuze and igniter would sometimes fall out if the mine was disturbed. The POMZ-2 has 6 rows of square preformed fragments, while the POMZ-2M has 5 rows and is slightly shorter.

The crude fragmentation jacket produces an uneven fragmentation effect. The effective radius of the mine is often quoted as four meters @ 360 degrees, but a small number of large fragments may be lethal at ranges far exceeding that.

The wooden stakes tend to rot in tropical climates, leaving the mine, if armed, in an extremely unpredictable state.

3D printing settings

I did not print the stake, because I intend to use wood one, but the fit should be good enough.
Printed on Prusa i3 MK3S
Infill 15%
Material prusament PLA
For better removing of the supports print the mine at slight angle (see picture).

3D printer file information

  • 3D design format: STL Folder details Close
    • Fuze.stl
    • PMR-2A.stl
    • Pin.stl
    • Stake_body.stl
    • Stake_dowel.stl
    • Stake_point.stl

    Learn more about the formats

  • Publication date: 2021/11/29 at 14:53





Issue with this design? Report a problem

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!