new intake pipe for AM6 engine
I created it because I couldn't pass a big carburetor (like pwk) because of the shock absorber. It is necessary to install using 2 screws M6*10 a rubber sleeve type most sold by scootfast (for my part I used this one but you could use another one) the distance between the screws of this one is 60mm. Put joint paste between the sleeve and the pipe and between the pipe and the valves.
I have been using it personally for more than two months now at the time I put it online (27.07.2019) and I have had no problems with deformation or breakage.
You will also need 4 M6*25 screws to fix the assembly after following the valves you have taken the correct screw lengths at the risk of damaging the housing threads.
20% filling rate
2mm hull line or 5 lines with a 0.4 mm nozzle
no help for membership on buildtak
Dagoma of 200 modify
fichier 3d de moto et autre modélisation
Hésitez pas à me contacter sur Instagram @max_impression_3D
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!