- 531 views
- 1 like
- 0 downloads
3D model description
Manual measure to fix OrangePiPlus2E_Case
Do not Use PLA filament for the Case, if no active fan cooling are use. Please Print with ABS, ASA, PETG for Passive Cooling. As the SOC will be very hot under heavy loads
This case need optional screws to ensure case are secure together:
Fan: 40x40x10mm 5v DC fan
Fan screws: 4* M2.5 X 8mm
Case screws: 4* M2.5 X 16mm
3D printing settings
Layer Height: 0.3mm, 0.2mm, 0.1mm
Support: Recommend on curve edge.
For light post-process (light sanding)
Wall: 3 layer
Top/Bottom: 5 layer
For Heavy Post-process (Heavy Sanding)
Wall: 4 layer
Top/Bottom: 10 layer
- 3D file format: STL
- Publication date: 2018/01/15 at 08:59
Makes created by the community
Best sellers of the category Various
Add a comment
Would you like to support Cults?
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.