Skip to content

Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print

Download 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, DzustoDownload 3D printing designs Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print, Dzusto

Did you 3D print this model?

3D model description

Nylon Internal Flat Slide and Slug ABA-258_ustrong 3d-print

High-quality 3d model of Nylon Internal Flat Slide

If you’re looking for a way to make raising and lowering your mainsail a breeze, then you might want to look
into installing sail slugs or slides on your sail. These small but mighty components allow the sail to move easily
inside the track and stack on the boom in the mast slot. Not only does this help prevent the sail from catching wind
and coming out of the bottom of the mast slot, but it also helps reduce wear and tear on your sail.
This selection includes external sail slides, internal sail slides, and slugs to help you complete the job. Slugs are
small barrels, often made of nylon that are secured ahead of the boltrope and then inserted into a slot on the mast
instead of the rope. Slides are similar but feature a small, T-shaped design to allow for easy installation in a mast
slot. External slides attach to a track on the outside of the mast. One thing to note is that if you need to replace
parts but can’t find the proper match, you will really need to replace all of the components. This is because your
sail won’t function properly if the hardware has a different amount of space between it and the sail.

Choosing the appropriate slug and slide really comes down to sizing and personal preference. When sizing,
the primary goal is to ensure that your slugs and slides properly fit the mainsail slot on your boat.
Once you’ve determined the appropriate sizing, you can pick styles that help you maximize sail performance.
For example, if your sail has full battens, you’ll want to choose a style that that will help distribute batten pressure
in order to prevent jamming.

use when printing

TiTi Hard (TPU D70)
Total PA GF30
NYLON 12, NYLON Carbon, NYLON Carbon 2

ATTN -------------nylon------------------------------------------------

keep the nylon dry
( Drying Nylon Filament - Simply place the coil in the oven at about 60 ° C for 5-6 hours. Of course, keep an eye out.)
The extrusion temperature of nylon should be 240-260 °C and above.

The work surface should be heated to approximately 100+ ° C.
recommend even 100 ° C and more, because nylon is sensitive to too fast cooling, from which it warps.
To help grip on a metal or glass desktop, use glue

Make sure the layer cooling fans are turned off, and the printing process itself is not drafted.

place the details on the table when printing, look at the photo

The model is made with much attention to details.

All real sizes you can see in the photos.

Everything can be seen in the photo.

The model can be printed as a 3D model, as well as produced on CNC machines.

Made in spaceclaim, tested in the manufacture of the master model of the product.

This is a fully solid-state version for 3d-print, this is not a scan version.

At the photos you can see the contours of the models on screens with stl or obj files, it is enough
to understand the possibility of printing a model or producing a model by a cnc machine

It is possible to model anyone another model according to your size or drawings and sketches.

ATTENTION! This item is a DIGITAL 3D model (*STL *OBJ file format) for ARTCAM, ASPIRE, CUT3D, Cura
anyone software applications for CNC and 3D printers.

Its files For CNC Routers and 3D printers.

Not a vectric, not a bitmap file, not a G-code. You buy a digital model image file for the manufacture of the product,
and not the product itself as a physical unit of goods made of glass or wood.

Non-commercial use only.
Attribution-NonCommercial CC BY-NC

  • 3D model format: MTL, OBJ, STL, and TXT

Tags

Creator

Modeling products and preparing products for production on CNC machines and 3D printing on production printers. Design of private houses, fences, doors, gates, furniture, industrial and industrial products of a wide range. I will answer all questions, only consider the possible misunderstanding asso.

Engineering design, the creation of electronic forms for the manufacture of prototypes, parts or spare parts for casting aluminum, bronze alloys, resins, plastics and other materials, as well as for cutting, stamping and milling parts on CNC machines taking into account tolerances, fit and conditions processing and grinding of these parts, or printing of parts and products on an industrial 3D printer, including printing with metal mixtures and compositions with different types of application of these compositions on the surface.

The design process follows your drawings, drawings, sketches or full-scale details.

A serious approach to design allows you to avoid problems at the stage of manufacturing parts and manufacturing parts from different materials and on different technological equipment. The use of modern software allows you to significantly speed up the process, creating layouts and prototypes of complex structures with a high level of detail. The resulting product is applicable to paperless production technology. Forms and formats of high-quality models of execution can immediately go to the CAM module for further translation into machine codes for CNC and 3D printers.

The obtained forms can be intended both for casting from a different number of fasteners of the form itself, and for manufacturing one-piece casting or part.

The form or model can be issued, including, in the form of STL AMF model ready to manufacture with a sufficient number of accurate polygons.

follow & contact me skype -> ygreknu twitter-> @Dzusto1

Copyright

©

Similar 3D files

Best sellers of the category Various

Related contents


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!