Mustang radio-controlled 4-wheel drive with front and rear differential
chassis with flat front and rear axle
adjustable body mounts
front and rear bumper designed to receive protective foam
chassis fully printed in ABS except tyres and shock absorber bellows printed in TPU
there are several different bellows, it's up to you to find the one that fits your TPU in clear print print all the bellows on a print and then test on a shock absorber which size fits best because too many different TPU's
For the settings you must know your printer and know how to set it but the basic cura settings are usually sufficient ABS without ventilation!!!!
TPU CURA settings
PLA for the bodywork as well
all in 0.1mm thickness
except gears at 30mm/s
if you can print the nylon gears see teflon it will only be better
the cups are glued on the diff output shafts except one cup on the central motor unit to be dismantled.
Reinforcements two have been created one for the female cardan shaft.
"the carding is printed flat and the backing is printed standing up."
then you glue the reinforcement to the female cardan shaft with cyano!
for the steering reinforcement the axles on the chassis are upright and print at the same time if you break one I also put them to print independently so they print upright and the reinforcement prints flat! then the same thing you glue the reinforcement on the axle
assembly with 2.5 mm diameter countersunk 5mm diameter wood screws in any brico
for electronics any sales site starting with either W or B or E or A etc...
you will find a "Brushed 540 motor between 15T and 20T" at about 20 euros.
a variator or ESC between 30A and 100A brushed noted FBR before brake and rear in the 20 euros also
and a servo type MG995 has 6 euros.
then the receiver of your remote control or a complete 2-channel remote control in the 20 euros too
SIZE 1/10th so length 45cm/ width 21cm/ height 12cm
100 per cent filling, especially for moving parts
large blocks can be 60 percent
at least two weeks to print everything
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!