Mega Felt Marker Topper
- 527 views
- 0 likes
- 5 downloads
3D model description
I was netting nice ink coverage but I started having issues with hardcore reversals that would send the marker shaft rotating into position so that the z stage couldn't raise further due to the Sharpies hitting the bot's ceiling. So,,, I increased the shaft's length at the bottom to clear the MK6 extruder stepper and fan with the lowest mounted Sharpie (leaves the most room for vertical movement) and added a latching brace that utilizes the MK6 top right M3 bolt so that reversal torque movement is eliminated.
I took the original stl that Bryan Duxbury uploaded and imported it into SketchUp (also attached below) and made my mods. Let me know if you have any issues with printing or functionality. As you can probably guess this was only tested on a factory MK6 setup and I have no idea if previous extruder builds will work.
This was printed and used on:
TOM # 4890
ABP with aluminum plate topper and titanium belt covered in kapton
3D printing settings
Remove top right M3 stepper bolt from extruder
Slide the Mega Felt Marker Topper over your 1.75MM filament
Mount filament into extruder
Insert M3 bolt back into the top right extruder stepper hole and tighten
Go nutty bonkers with color!
- 3D file format: STL
- Publication date: 2018/10/29 at 15:11
Best sellers of the category Various
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!