Skip to content

FMP Mask Imalize security COVID-19 (Easy to print, no media, filter required)

?
Creation quality: 4.1/5 (10 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

FMP Mask Imalize security COVID-19 (Easy to print, no media, filter required)

Design offered by Imalize in solidarity to fight against the virus

Comfortable, ergonomic, sterilizable, N95 with filter, easy to print and durable

Ready to print with 3D printer 12cm*12cm*12cm

This model includes only the mask structure (2 pieces) but does not include the filter required to effectively filter the virus :

  • We recommend the use of N95 or HEPA filters, Filter Mask Activated Carbon Filter Breathing Filters

To clean and kill the virus, we recommend one of the following steps every 3 hours in case of prolonged contact with an infected patient :

  • Bleach or high-concentration alcohol

  • Full dishwasher cycle (temperature drying included)

  • Microwave at least 2 minutes

  • Steam (minimum 10 min at 80°)

This model has not been approved by regulatory agencies. Use at your own risk

It was created and donated by Imalize to help people fight VIDOC-19

(Creative Commons License - Attribution - No commercial use - Share under the same conditions CC BY-NC-SA, registered design)

Mask FMP Imalize security COVID-19 (Easy-to-print, no support, filter required)

Ready to print with 3D Printer 4.7 "x4.7"

Comfortable, ergonomic, sterilizable, N95 2" Ready, easy to print and durable

This model only includes the mask structure (2 pieces) but does not include the required filter to effectively block the spread of the virus :

  • We recommend to use N95 or HEPA filters, Filter mask Activated carbon filter Respiratory filters

For cleaning and killing the virus, we recommend one of the following steps every 3 hours in case of prolonged contact with an infected patient :

  • Bleach or high concentration alcohol

  • Dishwasher full cycle (temperature drying included)

  • Microwave At least 2 minutes

  • Steamproof (minimum of 10 min at 80 degree Celsius)

This model has not been approved by any regulatory agency. Use it at your own risk

It was created and offered by Imalize to help people fight COVID-19...

(Creative Commons License - Attribution - No Commercial Use - Sharing under the same conditions CC BY-NC-SA, deposited model)


3D printing settings

Brackets: not necessary

Resolution: 0.25 mm

Filling: 35-40%.

Filament_material: ABS

Print Settings :

Supports: Not necessary

Resolution: 0.25 mm

Infill: 35-40%

Filament_material: ABS

3D printer file information

  • 3D design format: STL Folder details Close
    • Imalize Mask Virus Bouchon.stl
    • Imalize Mask Virus.stl

    Learn more about the formats

  • Publication date: 2020-03-30 at 21:07

License

CC BY NC SA

Tags

Creator

Imalize fournit des prototypes de qualité, des outillages rapides et des services de fabrication/finition pour les pièces unitaires et les petites séries de qualité dans des délais courts.

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Collection associated with this 3D model


Best sellers of the category Various


Add a comment

2 comments


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!