Looks like my idea works after a bit of testing. I've added a few options - Glue On Bank, Glue On w/Screws Exposed, Tabs with Holes for screw fastening, Screw On.
Two Options - Shape with heat and glue on or Shape with heat for snap on. The Glue on STL could be cut from Vinyl also for complete coverage.
This is a 3D printed .6mm thick belly plate. Simply put them on use a heat gun to soften and mold the tabs to the shape of the chassis. Clips and unclips easily. I recommend using some double sided tap under the tabs to help secure them.
Material, PLA - the front tabs kept breaking while bashing, worked really well on an off-road carpet track
PETG - worked well but the slap happy rear agains the cobble stone I was jumping on wore through really fast
PolyCarbonate carbon filled (PC) - is a little tough to mold after it cools but holds up extremely well. If it falls off while running, just heat up the tab and secure it a little better.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!