Stitch Lamp

Stitch lamp, the file represents a fanart of the Stitch character.

easy to print and assemble, the location for the passage of the leds is standard, so you can adapt any type of leds.

the basic scale is 26cm high by 20 wide, but if needed you can modify it, a margin has been made on the screw pitch to modify the scale if needed.

to be printed preferably in white or in slightly transparent filament for the passage of light.

the download is composed of three files:

• a tube to install the leds

• a model of Stitch with a pre support (modeled at the base for easy printing)

• a model without pre support

• the tube:

minimum walls = 2

minimum standard filling = 5%.

• Stitch with a pre backing:

adhesion to the board = none

minimum walls = 2

filling illuminates 10% of the surface

• one model without pre-support

minimum walls = 2

filling illuminates 10% of the walls

creates a support at the base of the model at the tube entrance