A small tribute to Thomas EDISON, inventor of the electric light bulb on October 22nd 1879, what would we do without it!
You will need a 12V led bulb or a simple led coupled with a resistance of about 4 or 500 ohms, a 9V battery with connector, 2 pieces of stripped copper wire diam 1.5 mm2, a large washer diam 27mm or smaller that you will glue at the bottom of the socket.look at the pictures for the assembly, very simple by the way, some soldering, insulated with hot glue or thermo sheath if you have !
The hole in the globe of the bulb is designed to insert a battery operated table candle, if you just want to make an original mood light.see the last 3 pictures.
A dummy cable for illusion and that's it!
Dazzle your friends!
Remove the cover from the globe after printing if printing 0.2 mm.
Please do not hesitate to send me your comments.
The globe of the bulb, filling 0 to 10% for transparency, edge of 15 turns if necessary according to tray adhesion.
Layer height 0.2 to 0.3 mm, thickness 0.8 to 1.2 mm
I printed with 0% and 0.8 mm thick in 0.2mm layers .
Threaded parts and sleeve, edge of approx. 15 turns, 0.2 mm layer height, 15 to 20 % filling, thickness 0.8 or 1.2 mm,
Substrate 20% filling, thickness 1.2 mm, layer height 0.2 mm.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!