Skip to content

Kool Aid Man Iconic Scene Diorama

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Kool-Aid Man
by RebelTaz

This is my version of the iconic Kool-Aid Man scene. There are many options here so that you can make it your own.

The available parts are as follows:

Body Choices
- body_justAddCubes
... this makes painting easier and helps give a better look to the ice cubes.
- body_justAddCubes_hollow
... I tried hollowing him out and pouring red paint inside, but didn't quite get the effect I was looking for, but this is still helpful for printing on resin printers while reducing resin usage.
- body_noCubes
... use this if you don't want ice cubes
- body_noLiquid
... use this one if you want the Kool Aid Man as an empty pitcher
- body_withCubes
... this has the ice cubes and the body all as one piece, for easier printing

Scene Options
- scene_noBricks
... this is the floor and brick wall together as one piece but without bricks, either print the loose bricks separately or leave them out completely
- scene_withBricks
... this includes the entire scene - the floor, the brick wall and the loose bricks - all printed together as one piece
- floor_noBricks
... use this if you want your scene built piece by piece, either with or without loose bricks
- floor_withBricks
... use this if you want your wall and floor printed separately but want the bricks and floor printed together as one
- brick_pile
... this is all of the loose bricks printed together in one go
- brick_single
... you can use this to add addition loose bricks to the scene or to place the bricks how you want them
- brick_wall
... this is (obviously) the brick wall that Kool Aid busts through printed by itself

- speechBubble
... "Oh Yeah!" in side a speech bubble that you can glue to the wall
- icecube
... If you print either if the 'justAddCubes' body options, you will need to print the ice cubes individually - you will need to print three of this piece in that case

My model as pictured here was printed as follows:
For Kool Aid himself, I printed on an Elegoo Mars 2 using clear resin and assembled used body_justAddCubes_hollow along with three icecube. The scene was printed on an Tevo Tarantula FDM printer and built using scene_noBricks and brick_pile. The speechBubble was printed on the FDM printer in white at 0.2mm layer height, swapping to black filament at layer 04 (on gcode starting at Layer 00). Everything was painted using cheap acrylic craft paints, leaving the pitcher and the ice cubes clear. Kool Aid was attached to the wall with UV resin as were the ice cubes. He has to be tilted just a tad to get him through the opening, but - as you can see - he does fit. The bricks and speech bubble were adhered using e6000 glue.

3D printer file information

  • 3D design format: STL and TXT Folder details Close
    • README.txt
    • body_justAddCubes.stl
    • body_justAddCubes_hollow.stl
    • body_noCubes.stl
    • body_noLiquid.stl
    • body_withCubes.stl
    • brick_pile.stl
    • brick_single.stl
    • brick_wall.stl
    • floor_noBricks.stl
    • floor_withBricks.stl
    • icecube.stl
    • scene_noBricks.stl
    • scene_withBricks.stl
    • speechBubble.stl

    Learn more about the formats

  • Publication date: 2021-11-08 at 06:32





Designs 246
Downloads 17.1k
Sales US$61.76
Liked designs 28 Followers 130

I am a self-proclaimed know-it-all. I will tackle any project regardless of my experience, or lack thereof. Always ready to learn something new. With over 25+ years experience in electronic repair and 10+ years experience in small engine / ATV / motorcycle repair, there is nothing I can't fix, modify or build.

Why a pepper? In case anyone is curious as to why there is a hot pepper embossed into most of my designs... My nickname is Pepper and that little pepper logo is a hell of a lot shorter than "Copyright © 2017 by Derek J.G. Tombrello" which is how I usually sign my work :)

In addition to donate using bitcoin via my address: 1DdWx5E86iQsVam361q3T4qMGKXdGBRCxx --or-- dogecoin at: DEKT6CjdR3uAKQjmiGteTAg8gvKphY9tw5

Issue with this design? Report a problem

Best 3D printer files of the Various category

Best sellers of the category Various

Add a comment

One comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!