Skip to content

I Dream of Jeannie Bottle

3D model description

Jeannie Bottle print, this was a complicated project... getting my hands on the original production drawings and re-drawing the bottle in CAD, test printed the stopper and bottle for a comparison to the original glass bottle. The glass bottle was not quite the same as the production drawings, so I revised my drawings and had it turned back into 3d, and the bottle details then added.... Chris from youtubes "todays 3d print" https://www.youtube.com/channel/UCusgqRXg90d7Nau1rqa4WqQ
working on the printing end of the model for youtube. Someday I will add things like the Jeannie's couch and pattern on the outside for people interested in a painting project on the outside of the bottle

3D printing settings

I printed this bottle with only supports around the top of the bottle where the angle is at around 90 degrees, this is a double walled model and will use a bit of plastic, It has been printed in VASE mode in 2 parts with great results i had the settings at .15 with a 25% infill

  • 3D model format: OBJ et STL

Tags

Creator

Followers 2 Following 0
Downloaded 16
Sales $6

Copyright

©

Similar 3D files


Add a comment