Skip to content

Hinge / M4 screws / 25mm offset

?
Creation's quality: 3.7/5 (6 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 3.3k views
  • 8 likes
  • 285 downloads

3D model description

This hinge uses an M4 screw (30mm or longer) as the hinge pin, and has 4 countersunk mounting holes which also suit M4 screws. The assembled hinge is 30mm x 40mm x 18mm. When the hinge is folded back, it gives 25mm clearance between the two mounting surfaces (e.g. to clear handles etc)

The mounting holes are spaced 20mm apart, and positioned 13mm from the edge of the panel where the hinge is fixed.

This is symmetrical, so you just print the same STL twice to get the two halves of the hinge.

I used an M4 x 30mm screw for the hinge pin (without a nut).

3D printer file information

  • 3D design format: SKP and STL Folder details Close
    • hinge01.skp
    • hinge01.stl

    Learn more about the formats

  • Publication date: 2020/05/25 at 15:40

License

CC BY

Tags

Creator

Issue with this design? Report a problem

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!