Skip to content

Gummy Bears Mold

?
Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 👁 797 views
  • 2 likes

3D model description

If you love gummy bears, as I do, then you'll love this design!

It's a mold so you can make your own big-size gummi bears! (It's about 20 normal-sized gummi bears together). The mold is divided into two parts, is easy to print and doesn't waste much material either. To join it you need 2 of that kind of pin that you get in the bookcases (I leave an image to guide you) and 2 screws of 5 cm long, with a nut to adjust the mold better and avoid spilling the content through any hole left (4.4 mm wide)

And I also leave you the recipe already tested by me, which worked deliciously well.

Recipe:

-10 to 15 normal gummi bears (more intense the flavor)

-3 to 5 teaspoons of grenetine (no flavor), same amount of water for hydration (the amount may vary from the final flavor)

-microwave everything together

-turn in the previously buttered mould and send to the fridge. 30 minutes of cold and it will be ready to remove from the mold.

Any question you can write me or contact me by IG @Jay.3d_


If you love gummy bears, just like I do, then you will love this design!

It is a mold to make your own large gummy bears! (They are about 20 normal-sized bears together approximately). The mold is divided into two parts, it is easy to print and it does not waste much material either. To join it, you need 2 of that kind of brooch that you can get in bookstores (I leave an image to guide you) and 2 screws 5 cm long, with a nut to better adjust the mold and prevent the content from spilling for some reason. gap left (4.4 mm wide)

And I also leave you the recipe already tested by me, which worked deliciously well for me.

Receive:

-from 10 to 15 normal gummy bears (the more quantity the more intense the flavor)

-3 to 5 teaspoons gelatin (unflavored) the same amount of water to hydrate (in the same way the amount can vary the final flavor)

-Melt in the microwave all together

-Pour into the previously greased mold and send to the fridge. Cold approx 30min and it will be ready to unmold.

Any questions you can write me or contact me by IG @ Jay.3d_

3D printer file information

  • 3D design format: STL Folder details Close
    • Molde 1 Ready.stl
    • Molde 2 Ready.stl
    • Osito Ready.stl

    Learn more about the formats

  • Last update: 2021/01/13 at 03:25
  • Publication date: 2021/01/04 at 03:43

Copyright

©

Tags

Creator

Designs 21
Downloads 125
Sales US$190
Followers 11

Hi! (•◡•) /
Follow me @jay.3d_
Personal account @jay.cee.dante
✯ Diseñador 3D ✯

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!