Gramazon 3rd Gen V2 - Amazon Echo Dot 3 Amplifier

/!\NNEW VERSION 2020 /!\N

First of all I invite you to check out the IamStarGoat thing if you haven't already done so, to get the details of the original project:

https://www.thingiverse.com/thing:2818405

This version has been completely remodeled for echo dot version 3.

Files are already oriented for better printing without media (except for GG3_V2_Joint)

For mounting: turn the GG3_V2_Chamber_Inside over and glue it into the GG3_V2_Chamber_Notch.

File to be printed for the base :

GG3_V2_Chamber_Notch.stl -> no brackets, needs to be rotated 45° to fit on a 20cm tray

GG3_V2_Chamber_Inside.stl -> no supports

GG3_V2_Chamber_Lid.stl -> no supports

GG3_V2_Holeplug.stl -> no supports

Print file for neck and horn:

GG3_V2_Neck_01.stl -> no supports

GG3_V2_Neck_02.stl -> no supports

GG3_V2_Neck_03.stl -> no supports

GG3_V2_Neck_04.stl -> no supports

GG3_V2_Horn.stl -> no media

File to be printed for the joint :

GG3_V2_Joint.stl -> support requirements

All parts of the neck, horn and joint must be glued together. For the base, only GG3_V2_Chamber_Inside can be glued in GG3_V2_Chamber_Notch.

Alexa Council:

In the mobile application, decrease the bass and increase the treble to the maximum for better sound.

Please, feel free if you like this model and want to support my free work, you can give me with paypal: https://www.paypal.me/DaGoN

Follow me for the latest news, see my creations :)