Skip to content

Gear Drum VH-11 ADAPTER (GD-ADP11)

?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

This is the Gear Drum VH-11 Adapter that we have shown on our Facebook page. It allows to use the Roland VH-11 controller with low volume cymbals (top and bottom hi-hat) in order to get a better natural playing.

Files Included:
- GD-ADP11_Base_v1
- GD-ADP11_Pusher_v1

The 10mm Tube can be 3d printed too, but we highly recommend to use a metal (steel or aluminum) Tube (OD 10mm, ID 8mm) in order to prevent any breakage over time.
The 10mm Tube length (L) should be calculated as "L = 32 + B" where B in measured following the instructions below:
https://www.geardrum.it/resources/Clutch_Measures_Guide_v1.pdf


3D printing settings

We have only ever printed the parts in Z-ULTRAT (ABS material). Settings and orientations we have used on our Zortrax M200 printer are shown on the attached photos.

Similar settings you can use on common 3d printers are below:
Temp: 260 °C (depending on the ABS you are using)
Max Print Speed: 70mm/s
Perimeter Speed: 33mm/s
Infill Speed: 46mm/s
Base layer Speed: 10mm/s
Platform temp: 80 °C
Infill: 50%
Rafts and support were used on any parts.
Layer height: 0.19mm

3D printer file information

  • 3D design format: STL Folder details Close
    • GD-ADP11_Base_v1.stl
    • GD-ADP11_Pusher_v1.stl

    Learn more about the formats

  • Publication date: 2021-07-08 at 22:21

License

CC BY NC ND

Tags

Creator

Hello Everyone this is the Official Gear Drum Cults page! Here there will be posted some of our best designs for sale so that you can buy, download and print them at home for yourselves! Any support will be much appreciated and will help to fund future projects for all you drummers!

Issue with this design? Report a problem

Best sellers of the category Various


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!